I have a 2019 iPad Air running the latest iPadOS, with FlipaClip at version 1.4.5. I hope you can help!
Sooooo I opened FlipaClip to work on a project, and when playing the preview, random frames seemed to be moved around. So like, frame 5 would show up between frame 1 and 2 if that makes sense. I checked the order of the frames in the frame viewer, and everything was where it was meant to be? I was worried I did something wrong, but I’ve tried everything I could think of to fix it and it just isn’t working. I’ve seen a few other people with this problem, and considering the update came out a few days ago, perhaps it’s a bug from that?
Either way, please try to fix this soon!
I went to watch my animation back and random frames popped up. I went through and the frames that weren’t meant to show up weren’t in any frames.
when i press play on my animations, it skips over 1 frame instead of playing the full thing
In my new stuff, it’s only animating every other frame help
While trying to play back an animation I made, I noticed that at some points the frame that was supposed to play became a previous frame, making it glitchy and difficult to see if I’ve made anything incorrectly. It would help me (and the others, if anyone is also experiencing this) a lot if this could get resolved. Thanks! (I use iPadOS 14.0.1)
Flickering back to random frames when trying to play the animation.
I’m using 25FPS and have an iPad Pro
This morning, FlipaClip was working fine and my frames were fine. After I downloaded the recent update in the app store, however (Update 1.4.3/1.4.2, if the app store is correct) and I tried to play the animation, the frames began to glitch to previous frames, lag, etc. I checked the other animations, and it seems as though this is happening with them, too. (mostly with animations at 24 fps). The frame glitching does not happen in 'movies', only in 'projects'. I believe this could be because of the new update, as this was working fine only a few minutes before I updated. I can't animate like this, please try and fix this!
When I’m trying to make my animation when I play it it goes back and repeats previous frames while in the middle of playing the animation, for example, I’m in the middle part of the animation and it will play the first frame. Please help and answer how I can fix this.
I'm making an animation in a 1920 x 1080 screen, with 12 fps. Whenever I preview it, it's slow, but doesn't show a "FPS drop because of device" message. Is there a fix to this?
For example, When i’m halfway into my animation and I play it, It always shows the wrong frame. This is happening on my iPhone, I don’t know if its because of that or if its a bug. If it is, can you please fix it?
So there’s a glitch that I have to deal with pretty much every day on FlipaClip and it’s really annoying. When I play my animation while working on it, it glitches and shows random frames at random times. Now, I like to just watch it and having a glitch like this causes a lot of problems when previewing it. Please, please fix this!
after about 100 frames my animation gets really slow and laggy. Is there a way you can make it faster? And maybe you can add a layer with opacity levels and a duplicate layer (that duplicate a selected layer) and I saw you added 3 more layers, and thats fantastic! But is there a way to have unlimited layers? Sorry for the amount of questions, but im so curious! This app is well made and fantastic too!
Hi, hello- this issue barely started last night. But when I play my animation(s) (to review them and such), some frames seem to appear on other frames. Like, let’s say I have a character showing towards the middle of the animation. Well, then some words from the beginning appear overlaying that character. I have no clue what’s going on- but it’s starting to get sorta-kinda annoying? And it’s messing with me.
Other info that needs to be stated(?)
I own an 11in IPad Pro.
IPad is running on 13.3.1
Flipaclip version 1.4.3
I expected it to stop glitching out after I had updated my iPad last night, but I think it’s just the app now since it keeps doing this when I play the animation. (And yes I checked the frames to see if this was me accidentally copying and pasting the frames, but nope..)
pls fix this bug, every time I play my animation it glitches and plays another frame
Opened up the app just like normally, and for some reason whenever I play an animation, some of the layers on a frame will switch out with others when playing, or just in general lag behind while everything else checks out fine. This is really annoying me whenever I tried to check if the whole animation looked okay.
When i play my animation, it starts mixing a bunch of random frames and I can’t see how its going
So I’m doing my animation and when I press play different flips are FLIPING like the beginning can be like a ball then there’s like a clip of a cat then it gets back to the ball. It’s so weird like every time I press play there’s like a glitch. Also when I erase one thing ,get to another flip, go back to the previous one ,What I erased comes back and this keeps going over and over again.
I don't know if this is a bug, but every time I have an animation with over 20 fps, the animation would get glitchy. One of my friends also have been experiencing this and told me to reduce the fps, which is a real bummer. Is there any explanation to this? I'm not mad, just a bit confused..
While playing your animation, it usually shows the whole thing but | While playing it NOW, playing iit it glitches, showing the frames previous. It happens a lot. | |
When I use playback and see my animation then add a few frames or something, when I try to play it again nothing happens. It just freezes on the first frame and I can’t hear the audio anymore. I tried an animation without audio and it played just fine. And after lowering FPS. Still won’t work.
Hello,
Just because you guys are not busy ! ;-)
I have a Samsung note pro 12, Kit Kat.
Every time I playback the animation, no matter how much frames it has and what the speed is, the play back is choppy and it drops frames. Not sure if I am the only one !
Cheers
please help. the fps dropping messes up my editing
I am using ipad pro premium flipaclip and im animating some lines but it wont play normally it glitches after pressing play button.
is there any ideas you can help me to fix this bug?
Hey thanks for the feedback! So what is laggy the animation playback preview? If that is the case let me explain what's going on. :)
So FlipaClip caches most frequently used frames into memory for really fast access. However, when we reach a limit on the amount of memory that can be used things do get a little slower. The reason is that reading an image from file takes time. So the more layers you have the longer a frame will take to load. So when you have a lot of frames they can't all be cached so live previewing slows down.
We have done miracles with speed in this area and we aren't stopping there. We are currently working on new methods to further improve the app speed for this area.
So with that in mind. We limit the number of layers for now since more layers means slower app performance. But this is something we are working on and will add more layers in the near future.
In the meantime, you can try to play the animation at a lower FPS, that should resolve your problem for now. Also, try to disable canvas rotation and remove FlipaClip from battery optimization because not enough RAM on your device can cause this issue.
The animation playback worked perfectly at 12fps.
I made a 4-frame looping animation, and it also worked fine. So the case must be applying to high-frame animations.
Thank Chayse, our developers are currently looking into this. Thank you very much for your patience and we apologize for any inconveniance caused.
Can you please try to lower the FPS to 10 or 12 FPS. Is it playing as it should that way?
Also, create some simple project with just a couple of frames. Is it the same or it happens only with a project with a high number of frames?
The animation playback worked perfectly at 12fps.
I made a 4-frame looping animation, and it also worked fine. So the case must be applying to high-frame animations.
I accidentally signed out but idk how to go back in but, [im the same person u replied to]
I have Version:1.4.5
This happened to every project,
And yes this happens every time I create a project.
Can you please try to lower the FPS to 10 or 12 FPS. Is it playing as it should that way?
Also, create some simple project with just a couple of frames. Is it the same or it happens only with a project with a high number of frames?
Hello,
1. What is the FlipaClip version that you have?
2. Does it happen with all the existing projects?
3. What happens when you create a new project? Is the issue the same?
Can you please do a screen recording of the screen showing your problem so we can better understand the issue?
Best,
Dusan
I accidentally signed out but idk how to go back in but, [im the same person u replied to]
I have Version:1.4.5
This happened to every project,
And yes this happens every time I create a project.
Hello,
1. What is the FlipaClip version that you have?
2. Does it happen with all the existing projects?
3. What happens when you create a new project? Is the issue the same?
Can you please do a screen recording of the screen showing your problem so we can better understand the issue?
Best,
Dusan
I have version 1.4.4, but the issue is still there.
Something I’ve noticed is that the issue only happens on higher frame rates. At 12fps, it’s fine, but at 24fps, the playback is glitchy.
I have a 2019 10.5” iPad Air on iPadOS 13.3.1.
Hi Chayse,
Can you please do a screen recording of the issue and upload video here so we can understand the issue better?
Thanks!
I have version 1.4.4, but the issue is still there.
Something I’ve noticed is that the issue only happens on higher frame rates. At 12fps, it’s fine, but at 24fps, the playback is glitchy.
I have a 2019 10.5” iPad Air on iPadOS 13.3.1.
I don't really know how to describe this in exact words, but I do have a video at hand. The audio may show as out of sync, but I can assure you that it's working fine, and isn't another concern.
I played a clip of a project I had finished and a project in which I have only started. The first project was choppier and slower than it should be, and the second is.. indescribable to me.
I'm worried that it will affect the video file when I upload it. I'm working on a Christmas cartoon and I need an answer asap.